Zip Aquapoint Unvented Water Heater 15 Litres 2kW
- Hot water for one or multiple outlets
- Ideal for aggressive water conditions
- Thermostat: Adjustable 7C to 75C
- Suitable for 3 basins or 1 large commercial sink
Zip Aquapoint Unvented Water Heater 15 Litres 2kW
The Zip 15ltr unvented water heater is ideal for hard water areas and is to be used with standard mixers and taps. Connects directly to the cold water mains supply using standard BSP fittings. The Zip 15ltr will supply one small kitchen sink or one hand wash basins.
Easy to use selective thermostatic temperature control range from: 7C to 75C and can also be used in conjunction with sensor operated taps. The reheat time from cold is >7min 70% vol, therefore this water heater will supply in excess of >30 litres per/hr.
Supplied with the expansion pressure relief valve! The minimum length of cold water pipe required to avoid using the expansion kit for the 15ltr is:15mm pipe = 1.37m and using 22mm pipe = 0.6m.
The available accessories listed are optional to your requirements, always seek advice from a qualified plumber.
- Zip Aquapoint lll unvented, multipoint 2kW water heater
- Hot water for one or more outlets used with standard mixers and taps
- Insulation: high performance, high density, CFC- free, polyurethane foam
- Pressure and temperature relief valve designed to operate at 7 bar & 90C
- Complies with LVD and EMC directives, CE endorsed, & WRAS approved
- Can also be used in conjunction with sensor operated taps
- The water connections are 1/2" BSP at the top of the appliance
- Water tank: 1.8mm glass enameled steel, tested to 12 bar
- Ideal for aggressive water conditions
- Maximum working pressure of 6 bar
- Reheat time 18 minutes for 15ltr, >45 ltr/hr
- Thermostat: Adjustable 7C to 75C
- Suitable for 3 basins or 1 large commercial sink
- H480mm: W350mm: D310mm
- Weight: Empty 9.8kg, Full 24.8kg
- Power: 220-240V / 50Hz / 13A
| Product Code | Dimensions (mm) | Power (kW) | Capacity (Litres) | Water Connection |
| AP315 | H480 x W350 x D310 | 2 | 15 | 1/2" BSP |
Our Delivery Charges and times are explained:
Delivery Charges
All deliveries have a standard charge of £8.50 + VAT up to 20kg. Where stated, certain products are delivered FREE of charge (mainland UK only*). Check the description of the desired product and if it says free delivery then you will not be charged for delivery*
Extra Charges
Where the weight is over 20kg we reserve the right to charge more dependent on product type and delivery postcode, our customer service team will be in touch and inform you of any extra charges before we despatch.
Delivery Times
All products will have a delivery time stated in their description. Next Working Day - these products will be delivered Next Working Day if ordered before 12.00, or in certain circumstances up until 4:00 pm. Please call if you require a Next Working Day and we will try our best to get it to you. Certain products will state within 48hrs, within 3 Days or within 5 days. These products will be delivered within the time stated. If you require delivery on a certain day please put this in the comments and we will aim to deliver on that day.
Certain products such as radiators are delivered after 5 working days, when purchasing a radiator please put in the desired delivery date which is 5 working days after ordering. In some cases, stock permitting, we can get radiators out sooner. Please call or put in the customer comments if you need something urgently and we will try our best.
Saturday Deliveries
We can arrange for a Saturday delivery for certain products, please call 01977 663331 for more details.
Please note: Although we will do our utmost to deliver your product in the time stated we cannot be held responsible for any unforeseen delays. Please do not book a plumber, electrician, etc until you have received the goods as we will not be held responsible for their time. Please read our terms and conditions for further details.
additional charges may be applicable dependent on your location please double-check with our customer service team
