Zip Aquapoint lll Undersink Water Heater 5 Litres
- Can also be used in conjunction with sensor operated taps
- Hot water for one outlet
- Thermostat: Adjustable 7C to 75C
- Suitable for 1 basin
Zip Aquapoint lll Undersink Water Heater 5 Litres
The Zip 5ltr unvented water heater is ideal for hard water areas and is to be used with standard mixers and taps. Connects directly to the cold water mains supply using standard BSP fittings. The Zip 5ltr will supply one small kitchen sink or one hand wash basins.
Easy to use selective thermostatic temperature control range from: 7C to 75C and can also be used in conjunction with sensor operated taps. The reheat time from cold is >7min 70% vol, therefore this water heater will supply in excess of >30 litres per/hr.
Supplied with the expansion pressure relief valve! The minimum length of cold water pipe required to avoid using the expansion kit for the 5ltr is:15mm pipe = 1.37m and using 22mm pipe = 0.6m.
The available accessories listed are optional to your requirements, always seek advice from a qualified plumber
- Zip Aquapoint lll unvented, multipoint 2kW water heater
- Hot water for one outlet used with standard mixers and taps
- Insulation: high performance, high density, CFC- free, polyurethane foam
- Pressure and temperature relief valve designed to operate at 7 bar & 90C
- Complies with LVD and EMC directives, CE endorsed, & WRAS approved
- Can also be used in conjunction with sensor operated taps
- The water connections are 1/2" BSP at the top of the appliance
- Water tank: 1.8mm glass enamelled steel, tested to 12 bar
- Ideal for aggressive water conditions
- Maximum working pressure of 6 bar
- Reheat time 7 minutes for 5ltr, >30 ltr/hr
- Thermostat: Adjustable 7C to 75C
- Expansion relief valve supplied
- Suitable for 1 basins or 1 small sink
- H376mm: W256mm: D260mm
- Weight: Empty 6.7kg, Full 12.7kg
- Power: 220-240V / 50Hz / 13A