Terma Towel Rail Element Programmable Controller
- Can control temperature between 10°C - 30°C
- Programmable Timer of the device from 15 minutes to 4 hours
- Equipped with an Antifreeze function
- Device does not require external power supply
- Can interact with multiple heaters in a single room
- The timer can be mounted on a wall or to function as a portable device
Towel Rail Element Programmable Controller
With this device you are able to control not only the time your towel rail heating comes on and off but also the temperature of the rail. The programmable thermostat ranges from 10°C - 30°C, this is controlled in steps of 0.5°C. This programmer allows you to set three different mode settings: economy, comfort and antifreeze controlling them in two modes: manual and automatic. It allows the calibration of the electronic sensor when the display is different from the room. The timer can be mounted on a wall or to function as a portable device.
The weekly timer allows you to program the device to operate in specific modes, for a whole week. There is also a function of the dryer, allowing operation of the device from 15 minutes to 4 hours. The programmer works wirelessly with all kinds of heaters equipped with IR receiver. Can interact and control multiple heaters in a single room with a maximum distance 6m.
- Suitable for controlling TT-IR and KTX4 range of elements
- Can control temperature between 10°C - 30°C
- Programmable timer operation from 15 minutes to 4 hours
- IP30 Rated
- Equipped with an Antifreeze function
- Device does not require external power supply
- Can interact with multiple heaters in a single room
- The programmer can be wall mounted or to function as a portable device
- Requires: 2 x LR03 (AAA)