Redring 3kW Electric Automatic Instant Hand Wash Unit
- Touch free hygienic operation
- Dimensions (mm): H195mm x W175 x P88
- Timed shut-off set at approximately 25 - 30 seconds
- Output (kW): 3kW
Redring Autosensor Instant Hand Wash Unit 3kW
The Redring 3kW Electric Instant hand wash Unit offers a compact and efficient solution providing instant hot water in settings where hygiene is crucial. Perfect for kitchens, restrooms and commercial environments, this wall mounted unit heats water on demand, ensuring a continuous supply without requiring a large storage tank.
With its powerful 3kW heating element, the Redring Instant Hand was Unit delivers hot water instantly wherever needed. The design eliminates the need for a storage tank, making this ideal for high traffic commercial areas. The unit is designed for user convenience, featuring an infrared sensor for quick, touch-free activation. An adjustable temperature dial allows users to set the desired water temperature, ensuring comfort and safety.
Safety is a key feature mof this Redring 3kW unit. Equipped with an automatic safety cut-off to prevent overheating, ensuring safe operation in busy settings. A pre-set maximum temperature limit is also included to prevent scalding. With a 3kW power rating, this hand wash unit provides rapid water heating while keeping energy use low. This efficiency helsp reduce water waste and lowers energy bills, making it an eco-friendly choice.
Â
- Touch free hygienic operation
- Dimensions (mm): H195mm x W175 x P88
- Timed shut-off set at approximately 25 - 30 seconds
- Output (kW): 3kW
- Energy rate: A
- Separate rotary flow control for seasonal temperature adjustment
- Sound (dB): 15dB
- Water Inlet Connection: 15mm
- IP rating: IPX4
- Sensor detecting range: 150mm
- Thermal cut-out temperature: 49℃
- GTIN/EAN: 5011139067319
Â
Â
| Product Code | RAHW3 |
| Dimensions (mm) | H195mm x W175mm x P88mm |
| Output (kW) | 3kW |
| Current Rating (Amps) | 13A |
| Energy Rating Class | A |
| Consumption (kWh/annum) | 81kWh |
| Sound dB | 15dB |
| Operating Pressure (psi/bar) | (15/1) - (150/10) |
| Thermal Cut-Out Temperature | 49°C |
| Water Inlet Connection (mm) | 15mm |
| Auto Shut Off (Seconds) | 25-30 Seconds |
| Sensor Detection Range (mm) | 150mm |
| IP Rating | IPX4 |
| GTIN/EAN | 5011139067319 |
How does the auto sensor work on the Redring?
The water heater is activated when the hand is passed under then sensor lens.
Can the Redring automatic be activated accidentally by walking past it?
The Redring is activated automatically by the sensor from a range of 150mm away.
How long will the water heater work when activated?
The Redring instant water heater will operate for a maximum of 25 - 30 seconds before shutting itself off, or you can simply pass your hand over the sensor again to stop it.
I have a 13amp power supply will the Redring be suitable?
Yes the Redring 3kW will work with a 13amp power supply.
Can you fit a UK 13amp plug to the Redring instant water heater?
No all instant water heaters must be installed by a competent electrician and for safety reasons they must be hard wired to a suitable power supply.
Does the Redring automatic need any accessories for installation?
No accessories required for the Redring automatic. Does not need any expansion kits and uses standard 15mm pipe fittings.
I have very high water pressure will this affect the Redring`s performance?
The Redring instant water heaters have an inbuilt water stabiliser so it will regulate fluctuating water pressures ranging from 0.7bar up to 7bar if you are unsure of your cold water supply pressure you can ask your water supplier to check this for you free of charge.
I dont have a mains water supply can I use the Redring instant water heater?
Yes you can use a header tank feed but this would need to give a minimum head pressure of 0.7bar (10psi) this can be achieved with a cistern type water header tank giving a minimum head of 10 meters (33ft).
What pipe fittings do I need for the Redring instant water heater?
The pipe fittings are standard UK 15mm pipe fittings, we supply the fittings to enable the installer to connect directly to the cold water 15mm supply pipe, there should be no need to purchase any special fittings for a full installation.
I have limited space to have the Redring installed what height should it be installed above the sink?
The manufacturers recommend that the bottom of the Redring should be 200mm (7.87 inches) from the basin or sink level.
Can I install the Redring in an outbuilding that is not heated?
Redring do not recommend that the water heater is installed in a room where it may be subject to freezing.
If I have a problem with the Redring who do I contact?
Redring have a customer help line on 08443727766 (UK Only) they will need to know the Model number and serial number on the bottom of the heater. Redring will also want to know when and where you purchased the goods, if you have forgotten your date of purchase please call our customer services team on 01977 663331 and we will help you with all the information you require.
Our Delivery Charges and times are explained:
Delivery Charges
All deliveries have a standard charge of £8.50 + VAT up to 20kg. Where stated, certain products are delivered FREE of charge (mainland UK only*). Check the description of the desired product and if it says free delivery then you will not be charged for delivery*
Extra Charges
Where the weight is over 20kg we reserve the right to charge more dependent on product type and delivery postcode, our customer service team will be in touch and inform you of any extra charges before we despatch.
Delivery Times
All products will have a delivery time stated in their description. Next Working Day - these products will be delivered Next Working Day if ordered before 12.00, or in certain circumstances up until 4:00 pm. Please call if you require a Next Working Day and we will try our best to get it to you. Certain products will state within 48hrs, within 3 Days or within 5 days. These products will be delivered within the time stated. If you require delivery on a certain day please put this in the comments and we will aim to deliver on that day.
Certain products such as radiators are delivered after 5 working days, when purchasing a radiator please put in the desired delivery date which is 5 working days after ordering. In some cases, stock permitting, we can get radiators out sooner. Please call or put in the customer comments if you need something urgently and we will try our best.
Saturday Deliveries
We can arrange for a Saturday delivery for certain products, please call 01977 663331 for more details.
Please note: Although we will do our utmost to deliver your product in the time stated we cannot be held responsible for any unforeseen delays. Please do not book a plumber, electrician, etc until you have received the goods as we will not be held responsible for their time. Please read our terms and conditions for further details.
additional charges may be applicable dependent on your location please double-check with our customer service team
