Powerflow Smart Unvented Multipoint Water Heater 1kW, 30L, 50L, 80L & 100L
- 1.0 kW element available for restricted load applications
- Digital control panel
- Neon element on indicator
- External electronic temperature control
Powerflow Smart
Unvented Multipoint Smart Technology Water Heater 30, 50, 80 and 100 litres!
The Hyco Powerflow Smart unvented multipoint water heater, is a high performance mains pressure unit which can be used for many applications. The power required is just 1kW therefore an ideal water heater if your power supplies are limited onsite.
Suitable for hand washing and dish washing where a number of hot water outlets are required such as kitchens, schools, restaurants, washrooms, healthcare environments and offices. The ideal solution for light industrial, commercial and light domestic hot water requirements.
They are available in the 30, 50, 80 and 100 litre capacities. The 30 litre is ideal for supplying 3-5 hand wash basins simultaneously, where the 50 litre will supply enough hot water for one bathtub. Please see our technical table wich will inform you of which capacities can be suitable for your requirements.
Installation could not be easier the PowerFlow can be sited at any convenient location above or below the outlets to be served, supplied with an unvented accessory kit which contains all you need for a full installation - keeping things simple.Â
Â
- Multi-sink capability, Wall mounted
- Factory fitted Temperature and Pressure Relief Valve - 7 Bar 90 degrees C
- Thermostat adjustable to 65 degrees C
- Building regulations approval
- Uses conventional taps, including mixers
- Highly efficient thermal insulation
- Slender slimline design
- Mains pressure flow rates
- Smart technology gives high energy efficiency
- Three modes of operation, standard, smart and eco
- Eco mode at 50°C
- IP Rating: IPX4
- Erp ratings A 30L, B 50, 80 and 100L
- Can be used with regular taps, including mixers
- 1.0 kW element available for restricted load applications
- Digital control panel
- Neon element on indicator
- External electronic temperature control
- Glass lined tank, 3 year tank warranty
- Comes complete with unvented accessory kit
- Wall mounted, connections to the base
- Cable pre-wired (1.5m)
Â
Features:
Outer Casing:
White powder coated steel.
Heating Element:
Stainless steel incoloy.
Thermostat:
Electronic 30 - 70°C.
Water Tank:
Glass lined steel
Anode:
Replaceable grey magnesium anode (inspect at least annually or more regularly in scale/ aggressive water conditions).
Insulation:
High density polyurethane foam (CFC free).
Safety:
Overheat temperature protection (manual reset).Â
Factory fitted temperature and pressure relief valve (set at 7 bar 91°C).
Pressure reducing valve (set at 3 bar).
Pressure relief valve at 6 bar.
Use with a thermostatic mixing valve to maintain hot water supplied to user at constant, safe temperature.
| SKU | PF30S1KW | PF50S1KW | PF80S1KW | PF100S1KW |
|---|---|---|---|---|
| Capacity (Litres) | 30 | 50 | 80 | 100 |
| Power (kW) | 1 | 1 | 1 | 1 |
| Dimentions (H x W x D) | 542 x 380 x 396 | 762 x 380 x 396 | 987 x 410 x 423 | 1139 x 420 x 423 |
| Weight Empty (kg) | 14 | 18 | 24 | 28 |
| Weight Full (kg) | 44 | 68 | 104 | 128 |
| Heat up Full* (Mins) | 74 | 123 | 196 | 245 |
| Suitable For | 3-5 Basins | 4-6 Basins | 5-8 Basins | 7-11 basins or 1 bed/1 shower |
* Minimum theoretical heat up time for 70% tank capacity from 10°C to 60°C
Â
Installation:
Must be wall mounted vertically with inlet/ outlet connections at base. Allow at least 500mm below and 200mm above the heater to facilitate future maintenance. Access to the thermal cut-out and element is located at base of unit.
Unvented Accessory Kit:
Supplied kit must be fitted. Contains expansion vessel with fixing bracket (5L for PF30S &Â PF50S, 8L for PF80S &Â PF100S), inlet group, flexible hose and 2 tundishes.
Plumbing:
Must be installed by a suitably qualified person. Minimum water pressure 1 bar. Maximum water pressure to pressure reducing valve 12 bar. Working water pressure 3 bar.
Water Connection:
Inlet/outlet connection 1/2 BSP male. (100mm apart centre to centre). Fittings required (not supplied): 2 x 15mm compression to 1/2 BSP female adapter.
Electrical Connection:
Installation must comply with current IET regulations. The product should be connected to the fixed wiring of the property via a suitably rated isolating switch with a contact separation of at least 3mm in all poles.
Our Delivery Charges and times are explained:
Delivery Charges
All deliveries have a standard charge of £8.50 + VAT up to 20kg. Where stated, certain products are delivered FREE of charge (mainland UK only*). Check the description of the desired product and if it says free delivery then you will not be charged for delivery*
Extra Charges
Where the weight is over 20kg we reserve the right to charge more dependent on product type and delivery postcode, our customer service team will be in touch and inform you of any extra charges before we despatch.
Delivery Times
All products will have a delivery time stated in their description. Next Working Day - these products will be delivered Next Working Day if ordered before 12.00, or in certain circumstances up until 4:00 pm. Please call if you require a Next Working Day and we will try our best to get it to you. Certain products will state within 48hrs, within 3 Days or within 5 days. These products will be delivered within the time stated. If you require delivery on a certain day please put this in the comments and we will aim to deliver on that day.
Certain products such as radiators are delivered after 5 working days, when purchasing a radiator please put in the desired delivery date which is 5 working days after ordering. In some cases, stock permitting, we can get radiators out sooner. Please call or put in the customer comments if you need something urgently and we will try our best.
Saturday Deliveries
We can arrange for a Saturday delivery for certain products, please call 01977 663331 for more details.
Please note: Although we will do our utmost to deliver your product in the time stated we cannot be held responsible for any unforeseen delays. Please do not book a plumber, electrician, etc until you have received the goods as we will not be held responsible for their time. Please read our terms and conditions for further details.
additional charges may be applicable dependent on your location please double-check with our customer service team