Handyflow Under Sink Vented Water Heater 5 Litres
- Installation: Under-sink floor mounted only!
- Colour coded connections for easy installation
- Easy to use external thermostatic temperature control
- No expansion kit required
Handyflow Under Sink Vented Water Heater 5 Litres
Floor mounted water heater supplied with hot and cold flexible hoses for ease of installation
The handy flow water heater is a floor mounted water heater ideal for occasional use light dish washing at a single kitchen sink in the workplace, for example portable buildings, offices, shops, workshops, garages and other small commercial premises.attractive because installation is very easy, no specialist accessories are needed. The Handy-flow.
The Slim-line vented under sink water heater retains the ease of installation of traditional vented over sink equivalents but has the additional benefits of being hidden below the sink giving less visual impact and including a chrome vented mixer tap rather than a spout and cold water tap.
The fact that the Handy flow Slimline vented under-sink water heater comes as a complete package and the user does not need to purchase a separate cold tap makes it an economic alternative to the Handy-flow vented over-sink unit. The vented mixer tap supplied with the water heater comes with hot and cold flexible hose for ease of installation and can also be purchased separately if required.
All fittings needed are supplied, complete with chrome vented mixer tap, hot & cold flexible hoses for a quick and easy installation!
- Installation: Undersink floor mounted only!
- Colour coded connections for easy installation
- External thermostatic temperature control
- Open outlet heater to supply hot water to a single sink
- Ideal when economy and ease of installation are the key priorities
- Suitable for single outlet only
- Frost protection setting
- Economy setting: 55C
- External temperature control with frost protection setting
- Neon element on indicator
- White corrosion proof case
- CFC free polyurethane insulation
- Safety thermal cut-out
- Power: 2 kW (copper element)
- Fuse: 13A
- Capacity: 5ltr
- IP Rating: IP24
- Empty Weight: 2kg
- Full Weight: 7kg
- Suitable for 1 hand wash basins
- Dimensions: H400mm x W270mm x D180mm
- Tap dimensions : H230 x D170mm
Plumbing:
Must be installed by a suitably qualified person.
Minimum water pressure 0.5 bar.
Maximum water pressure 8.0 bar.
Water Connection:
Cold water connection 1 x 15mm compression.
Outlet 1 x vented tap (supplied).
Fittings required (not supplied): none.
ONLY USE THE FITTINGS SUPPLIED SO THAT THE UNIT IS NOT PRESSURISED.
Electrical Connection:
Installation must comply with current IEE regulations.
The product should be connected to the fixed wiring of the property via a double pole fused spur with a minimum break capacity of 13 amps.
Cable pre-wired (1m).
Installation:
Must be sited below a sink, with the inlet and outlet connections at the top of the unit.