What colour Anthracite is this radiator?
The colour is RAL 7016
Can you advise what the pipe centres for the Bull radiators are?
The pipe centres are the widths of the radiator shown in the technical page, plus the valves you are using. Standard 1/2" radiator valves normally add >45mm to each side. Therefore radiator width + 90mm = Pipe centres.
Which Valves do I need if my pipes come from the wall?
If your pipe work is coming out of the wall you will need a set of Corner valves. If your pipes are vertical from the floor you will need angles valves, using standard 1/2" BSP valve fittings.
Are wall brackets supplied with this radiator?
Yes, steel wall brackets supplied.
What size radiator do i need to heat my room space?
See technical table, as a rule of thumb you will need 300 BTU/hr per square meter, based on a ceiling height of 2.4m.
What BTU/hr - Delta T are the radiators calculated?
The Bull radiator heat outputs are calculated from Delta T 50, the UK standard for all domestic gas boilers. If you require Delta T 60 BTU, simply times the BTU 50 T rating by 0.789 = BTU (Delta T60)
What size radiator do i need for my room?
As a rule of thumb you will need 300 BTU/hr per meter square based on any standard room height of 2.4m. Providing the room is insulated and double glazed windows. Column radiators are space saving, the smallest Column radiator 300 x 1010mm will give over 3,600 BTU/hr. Compare this to a typical single or double convector radiator the width would need to be >1400mm to give the same output as a column radiator. See technical page for radiator size and outputs given.
Can Column radiators be fixed to a stud wall?
Yes, they can using the correct wall fixing kit. However we would always recommend the use of column radiator slip on feet to take the majority of the load!
What is the HS/Commodity Code for this item when exporting?
7322190000