Bathroom Hair Dryer IP24 Wall Mounted With LCD Display 1.5kW

Bathroom Hair Dryer Wall Mounted With LCD Display 1.5kW.

UK shaver socket and electronic adjustable boost button to increase power.

The HD15015 model features a dual voltage, US / UK / European razor socket and electronic adjustable air outlet. The hairdryer will automatically turn itself off if the nozzle has not been replaced after use, so there is no risk of the unit staying on all day!

This 24IP rated Hair Dryer is designed for Hotel Rooms, Bathrooms and similar light commercial applications. It a comes with 5 heat settings and LCD time and temperature display. Also features a waterproof socket for electrical shaver & charge-up purposes.

Temperature control is complete with an LCD display indicating remaining running time and the current temperature that has been selected. The green LCD will immediately light up and the dryer will blow warm air at the default temperature setting of about 60 degrees C.

The current temperature is displayed, along with the remaining minutes before the unit automatically shuts down. This hair dryer has + & - buttons to enable the user to increase or decrease the blowing power.

• Water proof level: IP24 (Zone 2)
• 5 Heat Settings
• LED Background light source
• LCD time & temperature display
• Quiet, powerful long-life motor
• Switch on heat is set at 60C
• Digital temperature regulator keep airflow temperature constant
• 18 Minute timer and auto cool off in final minute
• Designed for light commercial applications
• Also features a waterproof socket for electrical shaver & charge-up purposes
• Easy temperature adjustment, simply press the + or - buttons on front of the unit
• The wall mounted hair dryers feature automatic start/stop
• Automatic timer which will stop the dryer if the nozzle has not been replaced
• Up-to-date Euro-style design to make your hotel or private washroom impressive
• Pure white finish, drip proof ABS casing
• Rated currant: 7A
• Rated power: 1500W
• Rated Voltage: 230-240V
• Rated hertz: 50-60Hz
• CE Approvals: EN60335 CE LVD / EMC
• EAN: 5060392673317

Electrical Connection:

Connection must be in accordance with the latest Edition of the Wiring Regulations. 

It is possible to connect a cable directly to the back of the unit so that there is no wiring visible to the user. There is a knockout disk next to the pre-wired flex exit that is designed to give cable access for this purpose

If improved access to the terminal block or cable grip is required it is possible to remove the front cover by undoing the four recessed screws on the back-plate. The terminal block should be accessible with the cover closed. If it is not, open the cover to re-position in a more convenient location

This model will start and stop automatically when the nozzle is removed from the base and will Automatically switch off after approximately 18 minutes of continuous use. To reset the timer replace the nozzle.